Harbour Industries Logo Mobile Menu Icon
Harbour Braided Wire Separator

Harbour’s LL coaxial cables, with expanded PTFE dielectrics and strip braid composite configurations, offer attenuation from 20 to 35% below other mil spec cables of comparable size. When size and weight are considerations, Harbour’s LL cables should be considered. The unique braid configuration and the expanded PTFE dielectrics of the LL cable constructions contribute to lower attenuation levels at higher frequencies, while providing shielding effectiveness levels that exceed those of flexible MIL-DTL-17 cables. Flat strips of silver plated copper are braided over the dielectric core with an intermediate metalized polyester or polyimide layer, and an outer round wire braid.

  

UNIQUE CABLE CONFIGURATION

 
The braid configuration and the expanded PTFE dielectrics of the LL cable constructions contribute to lower attenuation levels at higher frequencies, while providing shielding effectiveness levels that exceed those of flexible MIL-DTL-17 cables. Flat strips of silver plated copper are braided over the dielectric core with an intermediate metalized polyester or polyimide layer, and an outer round wire braid.
 

IMPROVED ELECTRICAL CHARACTERISTICS

 
Harbour’s LL cables with expanded PTFE dielectrics exhibit low coefficients of expansion over the entire operating temperature range from -55° C to +200° C. Impedance discontinuities are minimized at the cable-to-connector interface. Higher levels of power can be transmitted because higher temperatures do not affect the cable due to the thermal stability of the tape. Where phase versus temperature requirements are critical, Harbour’s LL cables allow for an approximately 75% lower phase shift and change in propagation time delay due to temperature. Temperature cycling tests have been performed on a number of Harbour’s cables with positive results.
 

LOWEST ATTENUATION FOR ANY GIVEN SIZE

 
Harbour’s LL coaxial cables, with expanded PTFE dielectrics and strip braid composite configurations, offer attenuation from 20 to 35% below other mil spec cables of comparable size. When size and weight are considerations, Harbour’s LL cables should be considered. 
 

CABLE CONSTRUCTIONS AND PHYSICAL AND ELECTRICAL CHARACTERISTICS

 
Special constructions are the norm rather than the exception, so please make sure you contact Harbour This email address is being protected from spambots. You need JavaScript enabled to view it. if you don’t see the specific construction for your application.  Part numbers for some of the more common cable constructions are LL120, LL160, LL142, LL235, LL335, and LL335i.
 

Contact Us Sidebar

Contact Us

Harbour Industries

802-985-3311 USA | 450-293-5304 Canada

This email address is being protected from spambots. You need JavaScript enabled to view it.

Item ID223